Epson WF-4730 series User Manual

51
7. Press the home button to exit.
You see the icon on the LCD screen and should be able to connect to your product directly
from your computer or device, and then print. If you are printing from a computer, make sure you
installed the network software as described on the Start Here sheet.
Note: If you don't see the icon on the LCD screen, you may have selected the wrong network
name or entered the password incorrectly. Repeat these steps to try again.
Parent topic: Wi-Fi Direct Mode Setup
Related references
Status Icon Information
Related tasks
Entering Characters on the LCD Screen
Wi-Fi Protected Setup (WPS)
If your network uses a WPS-enabled wireless router or access point, you can quickly connect your
product to the network using Wi-Fi Protected Setup (WPS).
Note: To check if your router is WPS-enabled, look for a button labeled WPS on your router or access
point. If there is no hardware button, there may be a virtual WPS button in the software for the device.
Check your network product documentation for details.
Using WPS to Connect to a Network
Parent topic: Wi-Fi or Wired Networking
Using WPS to Connect to a Network
If you have a WPS-enabled wireless router or access point, you can use Wi-Fi Protected Setup (WPS) to
connect your product to the network.
1. Press the home button, if necessary.
2. Press the icon.

Epson WF-4730 series Specifications

General

Functions	Print, Copy, Scan, Fax
Scanner Type	Color flatbed / ADF
Scan Resolution	1200 x 2400 dpi
Fax Capability	Yes
Fax Speed	33.6 Kbps
Mobile Printing	Epson Connect, Apple AirPrint, Google Cloud Print
Display	2.7" color touchscreen
Ink Cartridges	4 individual cartridges (Black, Cyan, Magenta, Yellow)
ADF Capacity	35 sheets
Printer Type	All-in-One
Print Speed (Black)	20 ISO ppm
Maximum Scan Size	8.5" x 14"
Connectivity	USB, Ethernet, Wi-Fi
Paper Capacity	250 sheets
Input Capacity	250 sheets
Duplex Printing	Yes
Paper Sizes	A4, A5, A6, B5, Letter, Legal