Epson WF-4730 series User Manual

60
Network Environment Messages
Message Solution
The same SSID may be set on several
access points.
Check the settings on your router and other access points
to make sure each one uses a different SSID.
The Wi-Fi environment needs to be
improved. Turn the wireless router off and
then turn it on. If the connection does not
improve, see the documentation for the
wireless router.
Move your product closer to your router or access point,
and remove any obstacles between them. Then turn off
your router or access point, wait about 10 seconds, and
turn it back on again. If you still cannot connect to your
product, check the documentation that came with your
router or access point for solutions.
*No more devices can be connected.
Disconnect one of the connected devices if
you want to add another one.
You can connect up to four computers or other devices to
your product using a Wi-Fi Direct (Simple AP) connection.
If you want to add another device, disconnect an existing
connected device first.
Parent topic: Printing a Network Connection Report
Configuring Email Server Settings
To use features such as scanning to email or forwarding faxes to email, you need to configure the email
server. You can select settings for the email server using the control panel on the product.
1. Press the home button, if necessary.
2. Select Settings.
3. Select General Settings.

Epson WF-4730 series Specifications

General

Functions	Print, Copy, Scan, Fax
Scanner Type	Color flatbed / ADF
Scan Resolution	1200 x 2400 dpi
Fax Capability	Yes
Fax Speed	33.6 Kbps
Mobile Printing	Epson Connect, Apple AirPrint, Google Cloud Print
Display	2.7" color touchscreen
Ink Cartridges	4 individual cartridges (Black, Cyan, Magenta, Yellow)
ADF Capacity	35 sheets
Printer Type	All-in-One
Print Speed (Black)	20 ISO ppm
Maximum Scan Size	8.5" x 14"
Connectivity	USB, Ethernet, Wi-Fi
Paper Capacity	250 sheets
Input Capacity	250 sheets
Duplex Printing	Yes
Paper Sizes	A4, A5, A6, B5, Letter, Legal