Epson WF-7210 series - Changing the Connection Method to a Computer; Disabling Wi-Fi from the Control Panel

Related Information
& “Changing the Connection Method to a Computer” on page 33
Changing the Connection Method to a Computer
Using the installer and re-set up in a dierent connection method.
❏ Setting up from the website
Access the following website, and then enter the product name. Go to Setup, and then start setting up.
http://epson.sn
❏ Setting up using the soware disc (only for the models that come with a soware disc and users with computers
with disc drives.)
Insert the
soware
disc into the computer, and then follow the on-screen instructions.
Selecting Change the Connection Methods
Follow the on-screen instructions until the following screen is displayed.
Select Change or re-set the connection method on the Select Soware Installation screen, and then click Next.
Disabling Wi-Fi from the Control Panel
When Wi-Fi is disabled, the Wi-Fi connection is disconnected.
1. Select Settings on the home screen.
2. Select System Administration > Network Settings > Wi - Fi S e t u p .
User's Guide
Network Settings
33