Epson WF-7210 series - Firmware Update; Saving Power; Saving Power - Control Panel

Skip Blank Page
Skips blank pages in the print data automatically.
Restore Default Settings
Select the menus on the control panel as described below.
Settings > System Administration > Restore Default Settings
Network Settings:
Resets the network settings to the default.
Clear All Data and Settings:
Resets all settings to the default.
Firmware Update
Select the menus on the control panel as described below.
Settings > System Administration > Firmware Update
Update:
Check if the latest version of the
rmware
has been uploaded to the network server. If an update is
available, you can select whether or not to start updating.
Current Version:
Displays the current rmware version of your printer.
Notication
:
Select On to receive a notication if a rmware update is available.
Saving Power
e printer enters sleep mode or turns o automatically if no operations are performed for a set period. You can
adjust the time before power management is applied. Any increase will aect the product's energy eciency. Please
consider the environment before making any change.
Depending on the location of purchase, the printer may have a feature that turns it
o
automatically if it is not
connected to the network for 30 minutes.
Saving Power - Control Panel
1. Enter Settings from the home screen, and then select System Administration.
2. Select Common Settings.
User's Guide
Preparing the Printer
52