Epson WF-7710 series User Manual

❏ If you have entered the SSID manually, check if it is correct. Check the SSID from the Network Status part on
the network connection report.
❏ If you are using push button setup to establish a network connection, make sure your access point supports
WPS. You cannot use push button setup if your access point does not support WPS.
❏ Makes sure your SSID uses only ASCII characters (alphanumeric characters and symbols).
e
printer cannot
display an SSID that contains non-ASCII characters.
❏ Makes sure you know your SSID and password before connecting to the access point. If you are using an access
point with its default settings, the SSID and password are located on a label on the access point. If you do not
know your SSID and password, contact the person who set up the access point, or see the documentation
provided with the access point.
❏ If you are connecting to an SSID generated from a tethering smart device, check for the SSID and password in
the documentation provided with the smart device.
❏ If your Wi-Fi connection suddenly disconnects, check for the conditions below. If any of these conditions are
applicable, reset your network settings by downloading and running the soware from the following website.
http://epson.sn > Setup
❏ Another smart device was added to the network using push button setup.
❏ e Wi-Fi network was set up using any method other than push button setup.
Related Information
& “Connecting to a Computer” on page 24
& “Making Wi-Fi Settings from the Printer” on page 25
E-5
Message:
Security mode (e.g. WEP, WPA) does not match the current setting of the printer. Conrm security mode. Contact
your network administrator for assistance.
Solutions:
Make sure the access point's security type is set to one of the following. If it is not, change the security type on the
access point, and then reset the printer's network settings.
❏ WEP-64 bit (40 bit)
❏ WEP-128 bit (104 bit)
❏ WPA PSK (TKIP/AES)
*
❏ WPA2 PSK (TKIP/AES)
*
❏ WPA (TKIP/AES)
❏ WPA2 (TKIP/AES)
* WPA PSK is also known as WPA Personal. WPA2 PSK is also known as WPA2 Personal.
User's Guide
Network Settings
35

Epson WF-7710 series Specifications

General

Type	all in one
Color	black
Touch Screen	yes
Display Size	4.3 inches
Tray Capacity	250
Output Tray Capacity	125
Automatic Document Feeder Capacity	35 sheets
Paper Size	3.5" x 5", 4" x 6", 5" x 7", 8" x 10", 8.5" x 11", 8.5" x 14", 11" x 17", 13" x 19", a4, a6, half letter, executive, user-definable (up to 47.2" length)
Paper Handling	up to 250 sheets
Printing Method	color
Color Print Speed	10 pages per minute
Mono Print Speed	18 pages per minute
Print Resolution Mono	up to 4800 x 2400
Print Resolution Color	up to 4800 x 1200
Media Types	plain paper, epson bright white paper, epson presentation paper matte, epson premium presentation paper matte
Two-Sided Printing	yes
Maximum Number of Pages Per Month	up to 20, 000
Photo Printing	yes
Scanner Type	flatbed
Scan Resolution	up to 9600
Duplex Scan	yes
Max Copies	999
Copier Resolution Mono	up to 600 x 600
Copier Resolution Color	up to 600 x 600
Fax Function	yes
Cartridges	252 durabrite ultra standard-capacity, 252xl durabrite ultra high-capacity, 254xl durabrite ultra extra high-capacity
Number Of Cartridges	4
Number of Ink Tanks	4
Internal Memory	yes
Memory Card	yes
Network	wired, wireless
Connectivity	apple airprint, epson iprint, google cloud print
OS Compatibility	windows® 10; 8/8.1; 7; vista®; server® 2003 (sp2) - server 2016, mac® os x® 10.6.8 - macos® 10.12.x
Mobile Devices Connection	yes

Weight and Dimensions

Height	13.4 inches
Width	22.3 inches
Net Weight	40.8 pounds