a. Error code
b. Messages on the Network Environment
Related Information
& “E-1” on page 34
& “E-2, E-3, E-7” on page 34
& “E-5” on page 35
& “E-6” on page 36
& “E-8” on page 36
& “E-9” on page 36
& “E-10” on page 37
& “E-11” on page 37
& “E-12” on page 38
& “E-13” on page 38
E-1
Message:
Conrm that the network cable is connected and network devices such as hub, router, or access point are turned
on.
Solutions:
❏ Make sure the Ethernet cable is securely connected to your printer and to your hub or other network device.
❏ Make sure your hub or other network device is turned on.
E-2, E-3, E-7
Message:
No wireless network names (SSID) found. Conrm that the router/access point is turned on and the wireless
network (SSID) is set up correctly. Contact your network administrator for assistance.
No wireless network names (SSID) found. Conrm that the wireless network name (SSID) of the PC you wish to
connect is set up correctly. Contact your network administrator for assistance.
Entered security key/password does not match the one set for your router/access point. Conrm security key/
password. Contact your network administrator for assistance.
Solutions:
❏ Make sure your access point is turned on.
❏ Conrm that your computer or device is connected correctly to the access point.
❏ Turn o the access point. Wait for about 10 seconds, and then turn it on.
❏ Place the printer closer to your access point and remove any obstacles between them.
User's Guide
Network Settings
34
To Next Page
Loading...
Need help?
General
Weight and Dimensions
