Epson WorkForce WF-2930 Series User Manual

e printer can be connected by Wi-Fi and Wi-Fi Direct (Simple AP) connection simultaneously. However, if you
start a network connection in Wi-Fi Direct (Simple AP) connection when the printer is connected by Wi-Fi, the
Wi-Fi is temporarily disconnected.
Connecting to Devices using Wi-Fi Direct
is method allows you to connect the printer directly to smart devices without a wireless router.
Note:
For iOS or Android users, it is convenient to set up from Epson Smart Panel.
You only need to make these settings for the printer and the smart device that you want to connect to once. Unless you
disable Wi-Fi Direct or restore the network settings to their defaults, you do not need to make these settings again.
1.
Select Wi-Fi Setup on the home screen.
To select an item, use the
u d l r buttons, and then press the OK button.
2.
Select Wi-Fi Direct.
3.
Check the message, and then press the OK button to proceed.
4.
Check the message, and then press the OK button to proceed.
5.
Press the
l .
6.
Select Other OS Devices.
7.
Scroll the screen with the
d button, and check the connection information for Wi-Fi Direct.
In These Situations > Connecting a Smart Device and Printer Directly (Wi-Fi Direct) > Connecting to Devices usin …
128

Epson WorkForce WF-2930 Series Specifications

General

Print Technology	Inkjet
Print Resolution	5760 x 1440 dpi
Connectivity	USB, Wi-Fi, Wi-Fi Direct
Functions	Print, Copy, Scan, Fax
Automatic Document Feeder	Yes
Duplex Printing	Yes
Input Capacity	100 sheets
Display	1.44" color LCD
Scanner Type	Flatbed color image scanner
Scan Resolution	1200 x 2400 dpi
Print Speed (Black)	10 ppm
Print Speed (Color)	5 ppm
Mobile Printing	Apple AirPrint, Mopria Print Service
Paper Sizes	Letter, Legal, A4, A6, Envelopes
Ink Cartridges	Black, Cyan, Magenta, Yellow