Epson WorkForce WF-2930 Series User Manual

A
Scanner unit support Supports the scanner unit.
B
Scanner unit Scans placed originals. Open when replacing ink cartridges or removing
jammed paper inside the printer. When you close the scanner unit, lift it
slightly so that the scanner unit support lifts out. For safety, the scanner unit
is closed in two steps.
C
Ink cartridge holder Install the ink cartridges. Ink is ejected from the print head nozzles.
Rear
A
Maintenance box cover Remove when replacing the maintenance box. You need a at-head
screwdriver to remove the maintenance box. The maintenance box is a
container that collects a very small amount of surplus ink during cleaning or
printing.
B
Rear cover Remove when removing jammed paper.
C
AC inlet Connects the power cord.
D
EXT. port Connects external phone devices.
E
LINE port Connects a phone line.
Part Names and Functions > Rear
19

Epson WorkForce WF-2930 Series Specifications

General

Print Technology	Inkjet
Print Resolution	5760 x 1440 dpi
Connectivity	USB, Wi-Fi, Wi-Fi Direct
Functions	Print, Copy, Scan, Fax
Automatic Document Feeder	Yes
Duplex Printing	Yes
Input Capacity	100 sheets
Display	1.44" color LCD
Scanner Type	Flatbed color image scanner
Scan Resolution	1200 x 2400 dpi
Print Speed (Black)	10 ppm
Print Speed (Color)	5 ppm
Mobile Printing	Apple AirPrint, Mopria Print Service
Paper Sizes	Letter, Legal, A4, A6, Envelopes
Ink Cartridges	Black, Cyan, Magenta, Yellow