Epson WorkForce WF-2930 Series User Manual

Loading Pre-punched Paper
Load paper at the center of the rear paper feeder with the printable side facing up.
❏ Load a single sheet of
dened
size plain paper with binding holes at the
le
or right.
❏ Adjust the print position of your le to avoid printing over the holes.
❏ Automatic 2-sided printing is not available for pre-punched paper.
Related Information
& “Available Paper and Capacities” on page 203
& “Unavailable Paper Types” on page 205
Loading Long Papers
When loading paper longer than legal size, store the paper support, and then atten the leading edge of the paper.
Select User-Dened as the paper size setting.
❏ Make sure the end of the paper is cut perpendicularly. A diagonal cut may cause paper feed problems.
❏ Long paper cannot be held in the output tray. Prepare a box and so on to make sure that paper does not fall on
the oor.
❏ Do not touch paper that is being fed or ejected. It could injure your hand or cause print quality to decline.
Related Information
& “Available Paper and Capacities” on page 203
& “Unavailable Paper Types” on page 205
Loading Paper > Loading Various Paper > Loading Long Papers
31

Epson WorkForce WF-2930 Series Specifications

General

Print Technology	Inkjet
Print Resolution	5760 x 1440 dpi
Connectivity	USB, Wi-Fi, Wi-Fi Direct
Functions	Print, Copy, Scan, Fax
Automatic Document Feeder	Yes
Duplex Printing	Yes
Input Capacity	100 sheets
Display	1.44" color LCD
Scanner Type	Flatbed color image scanner
Scan Resolution	1200 x 2400 dpi
Print Speed (Black)	10 ppm
Print Speed (Color)	5 ppm
Mobile Printing	Apple AirPrint, Mopria Print Service
Paper Sizes	Letter, Legal, A4, A6, Envelopes
Ink Cartridges	Black, Cyan, Magenta, Yellow