You cannot use this feature when sending a fax to multiple recipients.
Send Fax Later:
Sends a fax at a time you specied. Only a monochrome fax is available when using this option. See
the related information below on this topic.
Add Sender Info:
Select the position where you want to include the header information (sender name and fax number)
in the outgoing fax, or not to include the information.
❏ O: Sends a fax with no header information.
❏ Outside of Image: Sends a fax with header information in the top white margin of the fax. is
keeps the header from overlapping with the scanned image, however, the fax received by the
recipient may be printed across two sheets depending on the size of the originals.
❏ Inside of Image: Sends a fax with header information approximately 7 mm lower than the top of
the scanned image.
e
header may overlap with the image, however, the fax received by the
recipient will not be split into two documents.
Fax Header:
Select the header for the recipient. To use this feature, you should register multiple headers in
advance.
Additional Header Info:
Select the information you want to add. You can select one from Your Phone Number and
Destination List.
Transmission Report:
Prints a transmission report aer you send the fax.
Print on Error prints a report only when an error occurs.
When Attach Fax image to report has been set in Settings > Fax Settings > Report Settings, faxes
with errors are also printed with the report.
Related Information
& “Sending Many Pages of a Monochrome Document (Direct Send)” on page 86
& “Sending Faxes in Monochrome at a Specied Time of the Day (Send Fax Later)” on page 86
More
Select the menus on the control panel as described below.
Fax > Menu > More
Transmission Log:
You can check the history of sent or received fax jobs.
Faxing
>
Menu Options for Faxing
>
More
91
To Next Page
Loading...
Need help?
General
