Epson WorkForce WF-2930 Series User Manual

Placing Originals on the Scanner Glass
1.
Open the document cover.
2.
Remove any dust or stains on the surface of the scanner glass using a so, dry, clean cloth.
Note:
If there is any trash or dirt on the scanner glass, the scanning range may expand to include it, so the image of the
original may be displaced or reduced.
3.
Place the original face-down and slide it to the corner mark.
Note:
When originals are placed in the ADF and on the scanner glass, priority is given to the originals in the ADF.
4.
Close the cover gently.
!
Caution:
Be careful not to trap your ngers when closing the document cover. Otherwise you may be injured.
Placing Originals > Placing Originals on the Scanner Glass
35

Epson WorkForce WF-2930 Series Specifications

General

Print Technology	Inkjet
Print Resolution	5760 x 1440 dpi
Connectivity	USB, Wi-Fi, Wi-Fi Direct
Functions	Print, Copy, Scan, Fax
Automatic Document Feeder	Yes
Duplex Printing	Yes
Input Capacity	100 sheets
Display	1.44" color LCD
Scanner Type	Flatbed color image scanner
Scan Resolution	1200 x 2400 dpi
Print Speed (Black)	10 ppm
Print Speed (Color)	5 ppm
Mobile Printing	Apple AirPrint, Mopria Print Service
Paper Sizes	Letter, Legal, A4, A6, Envelopes
Ink Cartridges	Black, Cyan, Magenta, Yellow