Epson WorkForce WF-2930 Series User Manual

8.
On the smart device's Wi-Fi screen, select the SSID shown on the printer's control panel, and then enter the
password.
9.
On the printer's control panel, press the OK button.
10.
On the printing app screen for the smart device, select the printer that you want to connect to.
For smart devices that have been connected to the printer before, select the network name (SSID) on the smart
device's Wi-Fi screen to connect them again.
Note:
If you are using an iOS device, you can also connect by scanning the QR code with the standard iOS camera. See the link
below https://epson.sn.
Disconnecting Wi-Fi Direct (Simple AP) Connection
ere
are two methods available to disable a Wi-Fi Direct (Simple AP) connection; you can disable all connections
by using the printer's control panel, or disable each connection from the computer or the smart device. is
section explains how to disable all connections.
In These Situations > Connecting a Smart Device and Printer Directly (Wi-Fi Direct) > Disconnecting Wi-Fi Direct …
129

Epson WorkForce WF-2930 Series Specifications

General

Print Technology	Inkjet
Print Resolution	5760 x 1440 dpi
Connectivity	USB, Wi-Fi, Wi-Fi Direct
Functions	Print, Copy, Scan, Fax
Automatic Document Feeder	Yes
Duplex Printing	Yes
Input Capacity	100 sheets
Display	1.44" color LCD
Scanner Type	Flatbed color image scanner
Scan Resolution	1200 x 2400 dpi
Print Speed (Black)	10 ppm
Print Speed (Color)	5 ppm
Mobile Printing	Apple AirPrint, Mopria Print Service
Paper Sizes	Letter, Legal, A4, A6, Envelopes
Ink Cartridges	Black, Cyan, Magenta, Yellow