Epson WorkForce WF-2930 Series User Manual

Straight Lines Appear when Scanning from ADF
There is dust or dirt on the ADF or originals.
Solutions
Clean the ADF, and remove any dust or dirt that adheres to the originals.
& “Cleaning the ADF” on page 106
Oset Appears in the Background of Scanned Images
When scanning thin originals, images on the back may be scanned at the same time.
Solutions
When scanning from the scanner glass, place black paper or a desk pad over the original.
Cannot Scan the Correct Area on the Scanner Glass
The originals are not placed correctly.
Solutions
❏ Make sure the original is placed correctly against the alignment marks.
❏ If the edge of the scanned image is missing, move the original slightly away from the edge of the
scanner glass.
& “Placing Originals on the Scanner Glass” on page 35
Solving Problems > Printing, Copying, Scanning, and Faxing Quality is Poor > Scanned Image Problems
171

Epson WorkForce WF-2930 Series Specifications

General

Print Technology	Inkjet
Print Resolution	5760 x 1440 dpi
Connectivity	USB, Wi-Fi, Wi-Fi Direct
Functions	Print, Copy, Scan, Fax
Automatic Document Feeder	Yes
Duplex Printing	Yes
Input Capacity	100 sheets
Display	1.44" color LCD
Scanner Type	Flatbed color image scanner
Scan Resolution	1200 x 2400 dpi
Print Speed (Black)	10 ppm
Print Speed (Color)	5 ppm
Mobile Printing	Apple AirPrint, Mopria Print Service
Paper Sizes	Letter, Legal, A4, A6, Envelopes
Ink Cartridges	Black, Cyan, Magenta, Yellow