Epson Workforce WF-7310 Series - Print Counter

Select the menus on the control panel as described below.
Settings > General Settings > System Administration
Security Settings:
You can make the following security settings.
Delete All Internal Memory Jobs:
Delete all of the jobs stored in the internal memory.
Admin Settings:
❏ Admin Password
Set, change, and clear an administrator password.
❏ Lock Setting
Select whether or not to lock the control panel using the password registered in Admin
Password.
Password Encryption:
Select On to encrypt your password. If you turn the power o while restart is in progress, data
may be damaged and the printer settings are restores to defaults. In that case, set password
information again.
Customer Research:
Select Approve to provide product usage information such as the number of prints to Seiko Epson
Corporation.
Restore Default Settings:
Reset the settings in the following menus to their defaults.
❏ Network Settings
❏ All Except Network Settings
❏ All settings
Firmware Update:
You can get rmware information such as your current version and information on available updates.
Update:
Check if the latest version of the rmware has been uploaded to the network server. If an
update is available, you can select whether or not to start updating.
Notication:
Select On to receive a
notication
if a
rmware
update is available.
Print Counter
Select the menus on the control panel as described below.
Settings > Print Counter
Product Information > Settings Menu List > Print Counter
178