2.
Select General Settings > System Administration > Firmware Update > Update.
Note:
Select Notication > On to set the printer to regularly check for available rmware updates.
3.
Check the message displayed on the screen and start searching for available updates.
4.
If a message is displayed on the LCD screen informing you that a rmware update is available, follow the on-
screen instructions to start the update.
c
Important:
❏ Do not turn o or unplug the printer until the update is complete; otherwise, the printer may malfunction.
❏ If the rmware update is not completed or is unsuccessful, the printer does not start up normally and
"Recovery Mode" is displayed on the LCD screen the next time the printer is turned on. In this situation, you
need to update the rmware again using a computer. Connect the printer to the computer with a USB cable.
While "Recovery Mode" is displayed on the printer, you cannot update the rmware over a network
connection. On the computer, access your local Epson website, and then download the latest printer
rmware. See the instructions on the website for the next steps.
Updating Firmware Using Web Cong
When the printer can connect to the Internet, you can update the rmware from Web Cong.
1.
Access Web Cong and select the Device Management tab > Firmware Update.
2.
Click Start, and then follow the on-screen instructions.
e
rmware
conrmation
starts, and the
rmware
information is displayed if the updated
rmware
exists.
Note:
You can also update the rmware using Epson Device Admin. You can visually conrm the rmware information on the
device list. It is useful when you want to update multiple devices' rmware. See the Epson Device Admin guide or help for
more details.
Related Information
& “Application for
Conguring
Printer Operations (Web
Cong
)” on page 169
Updating Firmware without Connecting to the Internet
You can download the device's rmware from Epson website on the computer, and then connect the device and the
computer by USB cable to update the
rmware.
If you cannot update over the network, try this method.
1.
Access Epson website and download the rmware.
2.
Connect the computer that contains the downloaded rmware to the printer by USB cable.
3.
Double-click the downloaded .exe
le.
Epson Firmware Updater starts.
4.
Follow the on-screen instructions.
Maintaining the Printer
>
Installing or Uninstalling Applications Separately
>
Updating Applications and Firm
…
84
To Next Page
Loading...
Need help?
General
