8.
Prepare to pack the printer as shown below.
9.
Pack the printer in its box, using the protective materials.
!
Caution:
❏ When carrying the printer,
li
it using a stable position.
Liing
the printer using an unstable position may result
in injury.
❏ Because this printer is heavy, it should always be carried by two or more people when unpacking and
transporting.
❏ When liing the printer, place your hands in the positions shown below. If you li the printer holding other
positions, the printer may fall or you may trap your
ngers
when placing the printer.
❏ When carrying the printer, do not tilt it more than 10 degrees; otherwise the printer may fall.
c
Important:
❏ When storing or transporting the printer, avoid tilting it, placing it vertically, or turning it upside down;
otherwise ink may leak.
❏ Leave the ink cartridges installed. Removing the cartridges can dry out the print head and may prevent the
printer from printing.
When you use the printer again, make sure you remove the tape securing the ink cartridge holder. If print quality
has declined the next time you print, clean and align the print head.
Related Information
& “Checking and Cleaning the Print Head” on page 72
Maintaining the Printer
>
Transporting and Storing the Printer
86
To Next Page
Loading...
Need help?
General
