When the product is found successfully, the product’s web page is displayed as shown below. Select the menu you
want.
The web page also allows you to check the product’s status and update the product’s firmware.
Cleaning the Product
Cleaning the exterior of the product
To keep your product operating at its best, clean it thoroughly several times a year by using the following instructions.
c
Important:
Never use alcohol or thinner to clean the product. These chemicals can damage the product.
Note:
Close the paper support and the output tray when you are not using the product to protect the product from dust.
❏ Use a soft, dry, clean cloth to clean the LCD screen or touchpad. Do not use liquid or chemical cleaners.
❏ Use a soft, dry, clean cloth to clean the surface of the scanner glass. If the glass surface is stained with grease or some
other hard-to-remove material, use a small amount of glass cleaner and a soft cloth to remove it. Wipe off all
remaining liquid.
❏ Do not press the surface of the scanner glass with any force.
User’s Guide
Maintaining Your Product and Software
102
To Next Page
Loading...
