❏ Be careful not to scratch or damage the surface of the scanner glass, and do not use a hard or abrasive brush to clean
it. A damaged glass surface can decrease the scan quality.
Cleaning the interior of the product
To keep your print results at their best, clean the roller inside by using the following procedure.
!
Caution:
Be careful not to touch the parts inside the product.
c
Important:
❏ Be careful to keep water away from the electronic components.
❏ Do not spray the inside of the product with lubricants.
❏ Unsuitable oils can damage the mechanism. Contact your dealer or a qualified service person if lubrication is
needed.
For product with LCD screen:
A
Make sure that no warnings or errors are indicated in the control panel.
B
Load several sheets of A4-size plain paper in the sheet feeder.
C
Enter Copy mode from the Home menu.
D
Press x to make a copy without placing a document on the scanner glass.Repeat step 4 until the paper is not
smeared with ink.
For product without LCD screen:
A
Make sure that no warnings or errors are indicated in the control panel.
B
Load several sheets of A4-size plain paper in the sheet feeder.
C
Press one of the x buttons to make a copy without placing a document on the scanner glass.
D
Repeat step 3 until the paper is not smeared with ink.
Transporting the Product
If you need to transport your printer some distance, carefully prepare and repack it as described below. Use the original
box and packing materials, or a similar box that holds the printer snugly.
User’s Guide
Maintaining Your Product and Software
103
To Next Page
Loading...
Need help?
General
