Epson XP-410 Series User Manual

Note:
If the printer is equipped with a scanner unit support, close the scanner unit as shown below.
E
Press the button indicated in the LCD screen.
For the products without LCD screens: If all the lights on the control panel flash, press the P button to turn the
printer off and then on again. If only the P and b lights flash, press x r or r x button.
Preventing paper jams
If your paper jams frequently, check the following.
❏ The paper is smooth, not curled or wrinkled.
❏ You are using high-quality paper.
❏ The printable side of the paper is face up in the sheet feeder.
❏ The paper stack was fanned before loading.
❏ For plain paper, do not load paper above the line just under the H arrow mark inside the edge guide.
For Epson special media, make sure the number of sheets is less than the limit specified for the media.
& “Selecting Paper” on page 20
❏ The edge guides are snug against the edges of the paper.
❏ The product is on a flat, stable surface that extends beyond the base in all directions. The product will not operate
properly if it is tilted.
Reprinting after a paper jam (for Windows only)
After you cancel the print job because of a paper jam, you can reprint it without reprinting pages that have already been
printed.
A
Solve the paper jam.
& “Paper Jams” on page 119
User’s Guide
Troubleshooting for Printing/Copying
122

Epson XP-410 Series Specifications

General

Print Technology	Inkjet
Max Print Resolution	5760 x 1440 dpi
Scanner Type	Flatbed
Max Scan Resolution	1200 x 2400 dpi
Functions	Print, Scan, Copy
Copy Resolution	600 x 600 dpi
Paper Handling	100-sheet input tray
Mobile Printing	Epson Connect, Apple AirPrint, Google Cloud Print
Connectivity	USB, Wi-Fi
Print Speed (Black)	8.7 ppm
Print Speed (Color)	4.5 ppm
Copy Speed (Color)	3.8 cpm
Display	2.5" LCD
Paper Sizes	4" x 6", 5" x 7", 8" x 10", Letter, Legal, Envelopes
Copy Speed (Black)	7.7 cpm (ISO)