EasyManua.ls Logo

Erbe APC 3 - Physical and Environmental Specifications; Applicable Standards and Classifications

Erbe APC 3
70 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
4 Technical Data
14 / 70
80116-941_V24392
2023-03
If you use a compressed gas bottle, the residual vol-
ume display is activated at
25 x 10
5
Pa 25 bar 362.6 psi ±7.5 FS
1
1
Tolerance in relation to the entire measuring range
of the bottle pressure sensor
Residual volume display VIO display
Residual pressure display Manometer on the gas bottle
The APC 3 switches off at an input pressure of < 3 x 10
5
Pa < 3 bar < 43.5 psi
Dimensions and weight
Width x height x depth 415 x 100 x 375 mm
Weight 5.3 kg
Ambient conditions for transport and storage of unit
Temperat u re -29 °C to +60 °C
Relative humidity 15%–85%
Ambient conditions for operation of the unit
Temperat u re +10°C to +40°C
Relative humidity 15% - 80%, non-condensing
Air pressure 54 kPa – 106 kPa
Maximum operating altitude 5000 m above sea level
Acclimatizing
If the unit has been stored or transported at temperatures below +10 °C or above +40 °C, the unit will
require approx. 3
hours to acclimatize at room temperature.
Standards
Classification according to EC Directive 93/42/EEC II b
Classification according to Regulation (EU) 2017/
745
II b
Type as per EN 60 601-1 Defibrillation-proof type CF applied part
Gas-specific unit data

Other manuals for Erbe APC 3

Related product manuals