Erbe APC 3 - Modifications; Version 1.1.x Hardware and Software Changes

9 / 70
2 • Modifications
80116-941_V24392  2023-03
CHAPTER 2
Modifications
From Version 1.1.x
Hardware
Software
Component affected Description of the modification
Gas control module New design for gas control module (referred to as Hardware V 2
below).
The design modification has repercussions for spare parts order-
ing and means the APC 3 and the VIO 3 software must be
updated to V 1.1.4.
Component affected Description of the modification
Menu screen New function “System overview”: Display of information on VIO 3
and the connected system components (e.g. software version,
serial numbers).
New function “Display of the power curve”: Display of the power
values + duration of last activation.
V 1.1.4 A piece of software that supports the new and the old gas control
unit (see also hardware changes).