5 • System settings and "Service" menu
18 / 70
80116-941_V24392
2023-03
Version List V 1.0.x Shows the version of all assemblies integrated in the unit. Shows the
version of all modules connected to the unit.
V 1.0.x System: the system as a whole; this software ID is output on the start
screen.
V 1.0.x SCM: SysCheckMaster.
V 1.0.x MCM: Measurement and Control Module.
V 1.0.x GUI: Graphical User Interface.
V 1.0.x IIM1 to 6: Instrument Interface Module, slot 1 to 6
(Slots counted from top to bottom, VIO 3: 1 to 4, APC 3: 5 to 6).
V 1.0.x NE: Return electrode.
V 1.0.x PSU: Power Supply Unit.
V 1.0.x UGM: Universal Generator Module.
V 1.0.x GCM: Gas Control Module (APC 3).
V 1.0.x FS1R: Footswitch 1 (with ReMode).
V 1.0.x FS2R: Footswitch 2 (with ReMode).
V 1.2.x GWM: Gateway module (System Integration Module)
System Integration V 1.2.x Entry point for configuring the VIO 3 for integration in OP systems.
IP address V 1.0.x 1.1.0, 1.1.x: displays the IP address of the VIO 3.
From 1.2.x: displays the IP address of the VIO 3 if no GWM is installed.
If a GWM has been installed, this menu item is hidden. The IP address
of the unit is then displayed on the system overview screen.
Setting Available
from
Description
To Next Page
Loading...
