Erbe IES 2 - Settings and Service Functions; Setting Mode Procedures

25 / 46
6 • Settings and service functions
80116-443  10.16
CHAPTER 6
Settings and service functions
General information
This device has two operating modes for changing settings or to call up in-
formation for the service technician:
• Setting mode
• Service mode
Setting mode
Overview
Display Assembly Setting Range
P. 1 General Display brightness 1 – 10
P. 2 General Sound 0 (=off)
1 (=on)
P. 3 Occlusion Sensitivity of blocked
suction detection. If
there is ever blocked
suction, the system
switches off.
0 – 10
0 (=off)
P. 4 Occlusion Retrigger blocking
time = time period
after recognized
blocked suction
during which the
system remains
switched off.
0 – 10
0 (=off)
P. 5 Basic suction Time period of basic
suction. The basic
suction is active
during the work
breaks. The system
works with reduced
power.
1– 99 s 
continous (=on)