31 / 46
8 • Maintenance and servicing
80116-443
10.16
CHAPTER 8
Maintenance and servicing
Who is allowed to perform servicing and maintenance
work?
What is a technical safety check?
How often does a technical safety check have to be
performed?
ATTENTION! Adjustments, tests, modifications, maintenance and repair work may
only be performed by Erbe or persons trained by Erbe. If the work is not
performed by trained persons, Erbe accepts no liability and warranty
rights become void.
It is recommended that the technical safety check also be performed by
Erbe or persons trained by Erbe.
IMPORTANT! The technical safety check is a preventive measure to examine whether
the device is safe and ready for operation. In order to perform the vari
-
ous tests the current specifications and regulations of the particular
country and the instructions in this service manual must be observed.
IMPORTANT! Erbe recommends performing a technical safety check after every
repair, but at least once a year.
To Next Page
Loading...
