-26-
05/2021HB60
5. Maintenance
5.1. Routine maintenance
● Check hydraulic oil level
The level is indicated by the specific dipstick connected to the cap installed before the first use. Make
sure that the level does not drop below half tank in order to prevent the pump from drawing air and
causing the entire machine to malfunction. Check the oil level at least once a month. If more regular
top-ups are required, make sure there are no leaks in the hydraulic circuit.
● Tooling inspection
The tools components are subject to wear. Inspect frequently for excessive wear or damage and replace
as necessary.
● Machine cleaning
Keep machine surfaces clean and free of debris.
To Next Page
Loading...
