Cleaning and maintenance
10/2013 1014906-00 Operating instructions – 31/76
WARNING!
Injuries and damage due to improper maintenance!
If the maintenance intervals for the UV lamps are exceeded
or incompatible UV lamps are installed, the share of UVB
radiation may increase. Sunburn and other skin damage
may result.
Improper maintenance can cause the device to be damaged
or to become unusable.
– Always comply with the specified maintenance inter-
vals.
– Follow the cleaning instructions.
WARNING!
Danger of burns from hot lamps and device parts!
If the tanning device was operated before being switched off
and opened, lamps and housing parts may be hot.
– Before replacing lamps or other spare parts, wait until
lamps and metal parts of the device have cooled down
sufficiently.
WARNING!
Danger of pinching!
When opening and closing the panels and covers, you can
pinch your fingers.
7.2 Faults
Error codes are output to the display to simplify troubleshooting:
If a fault occurs, the error code flashes on the display.
If several errors occur, the error messages are displayed alternately.
Error elimination is acknowledged by pressing the START/STOP button.
If the error cannot be cleared, contact Customer Service (see page 2) or
your local service provider.
More detailed information regarding the error description and solutions is
available in 'Error Codes' (order no. 1011831-..).
To Next Page
Loading...
Need help?
General
