ergoline SUN SELECT 1400 - Replacing the AQUA SYSTEM Canister

Cleaning and maintenance
10/2013 1014906-00 Operating instructions – 57/76
– Unscrew the lid on the new canister.
– Write the date on the canister.
– Fit the canister in the holder.
– Close the bed base. You should hear the bed base click into place.
7.16.2 Replacing the AQUA SYSTEM canister
– Opening the bed base: see page 42.
– Remove the canister.
– Unscrew the lid on the new canister.
– Remove the lid with the hose from the old canister.
– Screw the lid with the hose onto the new canister.
– Push the hose well down so that it touches the bottom of the canister.
– Put the canister back in the device.
– Close the bed base. You should hear the bed base click into place.