Cleaning and maintenance
34/76
Component Interval Activity See page
After each
tanning session
When necessary
50 h
1 Adjustable air nozzles X Cleaning and disinfection 32
2 Acrylic panel X Cleaning and disinfection 32
14 Operating handle X Cleaning and disinfection 32
15 Display unit X Cleaning and disinfection 32
Control Center Cleaning and disinfection 32
Handle X Cleaning and disinfection 32
Protective goggles X Cleaning and disinfection 32
MP3 cable X Cleaning and disinfection 32
3 Condensation tank X Empty 53
8 Body cooling air nozzles, foot end X Clean 32
9, 11, 16 Surfaces X Cleaning and disinfection 32
12 Nozzles AQUA / AROMA SYSTEM X Clean 32
13 Body cooling air nozzles X Clean 32
4-6 Filter X Remove and clean filter 53
7 Filter X Remove and clean filter 51
10 Filter X Remove and clean filter 52
NOTE:
If desired, you may set the unit to require that cleaning be
confirmed after each tanning session by pressing the
START/STOP button (when the cool-down time for the main
fan has finished).
7.5 Maintenance
Maintenance and care play a major role in deciding the devices performance
and appearance over its useful life. Diligent compliance at the specified inter-
vals is absolutely necessary to ensure the proper operation of your tanning
system.
The current operating hours of the parts requiring maintenance can be dis-
played in the Presetting mode – see separate instructions 'Presettings' (order
no. 1011803-..).
Please note that the device must be inspected regularly by a JK authorized
representative every 12 months (from date of installation) to maintain its
proper condition!
To Next Page
Loading...
