ergoline SUN SELECT 1400 - Cleaning or replacing the UV lamps and filter panels in the shoulder tanner

Cleaning and maintenance
50/76
CAUTION!
Danger of overheating will exist if the wrong
UV high pressure lamps are used!
The danger of overheating will exist if the wrong UV high
pressure lamps are fitted in the shoulder tanner. The device
might be damaged.
– Only Ergoline Ultra UV high pressure lamps
(1500384-..) are to be fitted in the shoulder tanner.
Each of the high pressure lamps in the shoulder tanner is fitted with 2 different
filter panels. The two filter panels are secured in place inside the housing.
– Remove the screws.
– Use the suction cup to lift the upper filter panel.
– Pull out the holder.
– Use the suction cup to remove the two filter panels.
CAUTION!
Do not interchange filter panels!
The shoulder tanner is fitted with different filter panels.
a) Ultra Performance 912 (blue), order no. 1500635-..
b) Non-coated, order no. 1500160-..