4. Step
The strap lifter comes up automatically when the reversing sledge moves back
into the strapping system.
Now you have to loose the strap tension of your left hand; otherwise the
strap lifter will not be able to come up.
Fig. 62
-47-
The strap lifter lifts the second end of the strap up to working height so you
can grasp it without bending down.
Only keep the joystick pushed until the strap lifter is fully in its upper position.
The time, how long the strap lifter should remain in its upper position, can be
set in „page 3“ of the menu.
Attention!
You have to hold the strap loosely in your hand when the strap lifter comes
up.
The strapping system automatically switches off to prevent damages if you do
not let go of the strap when the strap lifter rises. The strap lifter can be raised
up again by pushing the joystick in the „move in“ direction twice.
To Next Page
Loading...
