-54-
8.4 Tensioning and sealing pallets below 70
cm height with ErgoPack standard Tool-
Lift
1.Step
Pull out the black knob of the
locking bolt. Afterwards, pull
the sealing head forward out
of the holder and place it on
the package to be strapped.
Fig. 78
Fig. 79
Fig. 80
3. Step
Overlap both straps so that the
beginning of the strap lies
underneath.
Pull the rocker lever to open
the clamp of the sealing head.
2. Step
Strap the package exactly as
described under point 8.1.
To Next Page
Loading...
