10.6 Changing the sealing head
4. Step
Remove the 4 screws of the red
metal cover at the holder of the
spiral cable.
3. Step
Unlock the red locking ring on
the plug of the cable of the
sealing head by turning it
counter clockwise. Now, remove
the plug.
Fig. 112
Fig. 113
Fig. 114
2. Step
Remove the cover „display“ by
pulling on the provided handle
holes diagonally downwards.
(The cover is fixed by magnets).
-72-
1. Step
Drive out the Tool-Lift forwards
so that the cover „display“ can
be disassembled.
Fig. 111
To Next Page
Loading...
