To Next PageTo Next Page
Need help?Do you have a question about the Erhardt+Leimer OL 80 and is the answer not in the manual?
General| Brand | Erhardt+Leimer |
|---|---|
| Model | OL 80 |
| Category | Digital Camera |
| Language | English |
Explains standard operation for width measuring and web guiding with one or two cameras on a moving web.
Defines symbols used for jobs to be performed and important information.
States the camera should only be operated by qualified personnel or suitably instructed persons.
Describes the camera's development for contact-free position measuring on a moving web.
Details the components of width measuring and web guiding systems, listing cameras, cables, and transmitters.
Explains the two different scanning methods: frontlighting and backlighting.
Selects frontlighting for lines or transparent webs and backlighting for opaque webs.
Explains how the distance K influences the camera's measuring range and resolution.
Guides the selection of light transmitter size and distance based on criteria.
Provides instructions for mounting the camera based on web travel direction and module reference.
Details how the light transmitter is mounted depending on the scanning process implemented.
Specifies the requirement for a uniform, contrast-free dark background for frontlighting.
Explains the necessity and placement of a support roller if the web forms folds or creases.
Sets the camera visual range at a 90° angle to the web surface and center.
Refers to the wiring diagram for checking electrical connections and securing leads.
Refers to the wiring diagram for verifying the supply voltage.
Explains assigning a CAN address for communication and device identification within the system.
Positions the web edge within the camera's visual range for accurate measurement.
Guides the adjustment of aperture and focusing for optimal image quality and depth of field.
Describes assigning CAN addresses and defining properties for each sensor to output a measured value.
Outlines two procedures, standard and template calibration, for achieving uniform reference variables.
Details the calibration process for the width measuring function using a template.
Covers settings specific to applications like width measurements or laminating processes.
Sets the target positions for measured values in web guiding systems before guiding commences.
Explains the meaning of LED indications on the camera controls for status and errors.
Lists and explains specific error codes related to exposure, operating status, and calibration.
