EasyManua.ls Logo

Ericsson RX1290 - Detailed Receiver Features; Inputs, Outputs, and Decoding Capabilities; Control and Clock;Calendar Functions

Ericsson RX1290
176 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Introduction
- Up to 40 preselected choices can be stored within the unit.
Multiple Inputs (Satellite Receivers):
- L-band Satellite Receivers have four inputs.
Video Decoding:
- MPEG 4:2:0 mode support.
- MPEG 4:2:2 mode support (MPEG-2 Only).
Audio Decoding:
- Sampling rate 48 kHz.
- All MPEG-1 data rates.
- AAC decode.
- All Dolby Digital AC-3 data rates, decoded as a Dolby Stereo downmix.
- Dolby E pass-through.
- Linear uncompressed audio, data rates as defined by SMPTE 302M.
- DTS audio detection and pass-through.
Data:
- Low Speed Data: RS-232 asynchronous (up to 38.4 kbps).
- High Speed Data: Ethernet Data-piping (up to 5 Mbps) (option).
Transport Stream Output:
- ASI Transport Stream output with maximum data rate 160 Mbps.
Remote Control:
- SNMP.
- RS-232 (Alteia protocol).
Clock/Calendar:
- Available to coordinate universal and local time.
- Constantly updated when locked to a valid Transport Stream.
Transport Stream Demultiplexing:
- Maximum capability is 160 Mbps, depending on CA in use and input front-
end.
Video Decoding:
- Maximum Video decoding capability of 90 Mbps.
Audio:
- Audio embedding in the digital video output.
VANC data support:
- Closed Captions.
- VITC.
- ARIB reference spec TR23.
Frame Synchronization of video output to a composite analogue input.
Local Control Methods:
EN/LZT 790 0003/2 R1A
1-6

Table of Contents

Related product manuals