Ericsson RX1290 - Receiver Control Modes; Overview of Control Modes; Front Panel Navigate and Edit Modes

Introduction
Figure 1.5 Role of the Decoder
1.5 Control Modes
1.5.1 Introduction
The Multi-Format Receiver is designed for unattended operation. Once set-up, the
unit requires no further attention except to ensure the fans are working. There are
up to three control modes associated with the Receiver (dependent upon options
fitted). The unit remains in the chosen control mode until another mode is requested.
Note: Local (Front Panel) Control is the factory default if Director is not installed.
1.5.2 Front Panel (Local) Modes
Operating the Multi-Format Receiver from the Front Panel is via two main operating
modes: Navigate and Edit. See Section 3.3, Front Panel Operating Modes.
Figure 1.6 Front Panel States
EDIT
NAVIGATE
EDIT On
SAVE
Timeout (5 minutes)
EDIT Off
EN/LZT 790 0003/2 R1A
1-11