EasyManua.ls Logo

Ericsson RX1290 - Conditional Access System Details; BISS, RAS, Director, and DVB Common Interface

Ericsson RX1290
176 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Operating the Equipment Locally
3.8.2 Basic Interoperable Scrambling System (BISS) (Menu 4.4)
BISS Mode 1 is similar to RAS in that it uses a fixed control word to encrypt the data
in the transport stream. Unlike RAS, the scrambling algorithm is non-proprietary,
using the DVB Common Scrambling Algorithm to allow interoperability with other
manufacturers’ encoding/scrambling equipment.
3.8.3 Remote Authorization System (RAS) (Menu 4.1)
RAS has two levels of operation: FIXED KEY MODE and DSNG KEY MODE.
FIXED KEY MODE has a fixed control word to encrypt the data in the transport
stream.
DSNG KEY MODE is used for fixed headend systems. Its main functionality is:
Over-air addressing of Receivers for authorization/de-authorization to decrypt
the transmission.
Group operation for authorization/de-authorization.
Periodic control word changes during transmission.
3.8.4 Director (Menu 4.3)
Director functionality includes Conditional Access, over-air software download and
over-air control.
No specific set-up is required in the Multi-Format Receiver for the Conditional
Access or software download. For over-air control (NCP) see Chapter 4, Operating
the Equipment Remotely.
3.8.5 DVB Common Interface (Menu 4.2)
There is a single slot on the Multi-Format Receiver front panel to allow the insertion
of a DVB Common Interface (CI) Conditional Access module (CAM) and related
conditional access card.
Other than the insertion of the CAM and Access card, no specific set-up is required
at the Multi-Format Receiver for the DVB Conditional Access, however DVB
Common Interface functionality is only available if the RX1290/SWO/CI license has
been installed.
EN/LZT 790 0003/2 R1A
3-24

Table of Contents

Related product manuals