Ericsson RX1290 - Video Signal Data Insertion; VANC Data, Splice Point, Station ID, AFD Insertion

Operating the Equipment Locally
3.7.21 Setting Up VANC Data Insertion
Table 3.30 Setting Up VANC Data Insertion
Step Action Result
1
Scroll down to Menu 3.11.1
and edit the parameter for
enabling VANC Data insertion
(ENABLED or DISABLED).
Press Save.
Edits the parameter for enabling VANC Data
insertion.
PLEASE NOTE: Any data passed by this
method will overwrite any duplicate VBI
information.
3.7.22 Setting Up Splice Point Insertion
Table 3.31 Setting Up Splice Point Insertion
Step Action Result
1
Scroll down to Menu 3.12.1
and edit the parameter for
enabling VANC Data insertion
(ENABLED or DISABLED).
Press Save.
Edits the parameter for enabling Splice Point
insertion.
3.7.23 Setting Up Station ID Insertion
Table 3.32 Setting Up Station ID Insertion
Step Action Result
1
Scroll down to Menu 3.13.1
and edit the parameter for
enabling Station ID insertion
(ENABLED or DISABLED).
Press Save.
Edits the parameter for enabling Station ID
insertion.
3.7.24 Setting Up AFD Insertion
Table 3.33 Setting Up AFD Insertion
Step Action Result
1
Scroll down to Menu 3.14.1
and edit the parameter for
enabling AFD insertion
(ENABLED or DISABLED).
Press Save.
Edits the parameter for enabling AFD insertion.
EN/LZT 790 0003/2 R1A
3-22