Ericsson RX8000 Series - Page 48

Chapter 2
EN/LZT 790 0005 R1A
2-16
2.7.13 RS232/RS485 REMOTE Connector
A remote control interface may be used with either RS232
or RS485 connector, as detailed below.
Table 2.14 RS232/RS485 REMOTE Connector
Item Specification
Connector type 9-way, D-type, male
Connector designation RS232/RS485 REMOTE
Pin RS232 RS485
Pin-outs Pin 1
Pin 2
Pin 3
Pin 4
Pin 5
Pin 6
Pin 7
Pin 8
Pin 9
DCD
RxD
TxD
DTR
Ground
DSR
RTS
CTS
RI
NC
NC
NC
RxD
NC
TxD-
TxD+
RXD-
NC
RS232/RS485 REMOTE