2.Connecting Your Phone
Your system administrator will likely connect your new SayHi
ES320/ES330/WS320/DS3X2/GS320 IP Phone to the corporate IP telephony network. If
that is not the case, refer to the graphic and table below to connect your phone.
1) Open the box ES320/ES330/WS320/DS3X2/GS320 IP Phone; carefully check the
packing list, Packing List as follows:
2) As shown in figure 2.1 and figure 2.2, Please plug Handset Cord into RJ11
interface(IP Phone and Handset), RJ45 cable into the LAN interface；IP Phone will
automatically start if IP Phone with POE function.
3) The phone must work together with power adapter without POE support.
4) Connect your computer to PC interface of the phone with cable.
* More detailed description please refers to the
3.Phone overview-Understanding
phone buttons and hardware
.
Figure 2.1 Interfaces of SayHi ES320/ES330/WS320/DS3X2/GS320
To Next Page
Loading...
