58
Table 6-8. Descriptions for SO Command
Syntax Description
SO
<nn>
command is used to select the reference impedance for dBm
calculation.
<nn>
is a two-digit decimal numeric number from “00” to “20”,
representing 21 different types of reference impedance.
Example: Command string “SO15” to set reference impedance at 600Ω.
nn Impedance nn Impedance nn Impedance
00 2Ω 07 110Ω 14 500Ω
01 4Ω 08 124Ω 15 600Ω
02 8Ω 09 125Ω 16 800Ω
03 16Ω 10 135Ω 17 900Ω
04 50Ω 11 150Ω 18 1000Ω
05 75Ω 12 250Ω 19 1200Ω
SO<nn>
06
93Ω 13 300Ω 20 8000Ω
To Next Page
Loading...