EasyManua.ls Logo

ESI IVX 20 - Programming Guest Mailboxes

ESI IVX 20
55 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
IVX 20 Guest mailboxes
C.5
Programming your guest mailbox from a Digital Feature Phone
Press PROG, *, and the mailbox number. You will be prompted to: record the greeting, change the
password, enter an external paging number, or exit by hanging up.
1 Select personal greeting
Select the desired Greeting Number 1, 2, or 3. The current greeting will be played followed by
prompts to re-record, delete, hear again, or select as the current greeting by pressing #.
1 Record personal greeting
Begin recording at the tone, press 1 to stop. The new personal greeting automatically replaces the
previous greeting.
Important: Your mailbox will work only if at least one personal greeting exists for it.
2 Delete personal greeting
When prompted, press 2 again to confirm deletion. (See “Important” note, above.)
3 Hear current personal greeting
5 Password
Your password may consist of 2–8 digits followed by # (0 cannot be the first digit). The password
will apply to station programming, voice mail retrieval and certain other features when activated. If
you prefer not to have to enter a password, enter 0 as your password or select one of the following
password levels:
Selection Result
0 No password required for access from any phone
1 Password required only for remote access, either off-premises
or from other stations within the system
2 Password always required
1 Enter new password
2 Delete current password
3 Hear current password

Table of Contents

Related product manuals