IVX 20 Digital Feature Phone operation
A.5
Direct station select
Programming some of the Programmable Keys as station keys will provide direct access to those
stations as well as providing lamp information as to their status. The station keys’ LEDs indicates
the status of the station assigned to each key:
If a station key’s LED is . . . The station assigned to that key is . . .
Unlit Available; currently unused
Red; steadily lit In use
Red; blinking Ringing from another call
Green; steadily lit Connected to you (including via voice mail)
Green; blinking Ringing from your call
Amber; steadily lit In DND mode
To call another station programmed into one of your station keys:
1.
Press an available (unlit) station key.
2.
The called station will sound a short ring followed by a double connect tone.
3.
IVX will activate the called station’s speakerphone (or the station will ring if that station’s user
has hands-free answer disabled).
4.
To disconnect when finished, either:
(a.) Replace the handset.
or
(b.) (if in hands-free mode) Press the station key again.
or
(c.) Press RELEASE.
or
(d.) Press SPEAKER (if in hands-free mode).
If you press a station key that is in use (red; steadily lit) you will “camp onto” the station, indicating
to the other user, via his/her phone’s display, that you are waiting (see “Call waiting,” page A.8).
If you press a station key that is in DND (amber; blinking slowly), you will be forwarded directly to
the user’s mailbox.
To Next Page
Loading...
