ESS XT-3 - Parts List

ESS XT-3 OWNER’S MANUAL
Liquid Hose & Quick
Connecons:
1. Turn o the sprayer, and take the
removed ng out of the base
unit.
2. Reconnect the blue hose to the
base unit.
3. Plug the “removed ng” into the
other end of the blue hose where
the liquid quick connect is.
4. Turn on the sprayer, water should
spray out of the end of the hose.
If the water sprays out of the ng we
now know it is not in the base or the
hose.
The Flow Disc and lter:
1. Turn o the Sprayer and
reconnect the “Removed
Fing” to the back of
the Spray gun.
2. Remove the ow disc
and lter
3. Reconnect the coupling
without the ow disc
and lter inside.
4. Turn on the sprayer and
depress the trigger.
5. If water sprays out the
spray wand you know
the clog is not int the
ow disc or the lter.
1
3
2
4
1
3
2