ESS XT-3 - Chemical Safety Precautions; About the Low-Voltage System of the Maxcharge Spraywand

ESS XT-3 OWNER’S MANUAL
About the low-voltage system of the MaxCharge Spray gun
For operator safety, the power supply for the MaxCharge spraywand is enrely separate from the power supply for
the sprayer’s compressor. The .spraywand is powered by 9-volt baeries in the handle of the XT -3 sprayer. This
low-voltage charge is not enough to harm people. Some people report feeling a “ngle” or a slight snging
sensaon when the spray from the spraywand falls on their bare skin.
CHEMICAL SAFETY PRECAUTIONS
Read and follow all instrucons on the chemical or pescide manufacturer’s label.
Use protecve clothing, eye protecon and gloves when mixing chemicals to be sprayed with the XT -3 sprayer.
Some of the chemicals that can be used in the BP1 may be harmful to the skin or if inhaled. When in doubt, use a
respirator and eye protecon when spraying with the spraywand.
Follow the chemical manufacturer’s recommendaons in handling, mixing, applying, storing and disposing of
chemicals.
Be aware of decontaminaon methods in case a person, clothing, or equipment is accidentally sprayed.
Be aware of poisoning symptoms and know the appropriate rst aid.
Know the length of me needed to pass before allowing people and pets to go back into the sprayed area.
3