ESSENCY EXR - Page 37

37
USEFUL TIPS
FEATURE PATH WHY?
Acknowledging/clearing
alarm
1. From the home page, short tap
on the (Confirm) button (B7) to
check the alarm code.
2. Long tap on the (Confirm)
button if the alarm needs/can be
acknowledged.
• The unit can clear auto-reset
alarms. When the source of the
fault disappears (sensor fault
for example), the unit can work
normally with no action required on
the touchscreen.
• The unit cannot manage manual
reset alarms. A manual reset
is required for the unit to work
normally again.
Checking Alarm History
1. From the home page, long tap on
the (Multi Function) button.
2. Scroll with (+) or (-) to History
(HIST). (Confirm).
3. Scroll through the history with (+)
or (-).
• Each time an alarm occurs, the unit
stores it in the alarm history (also
available in the App). Up to 16 of
the most recent alarms are stored.
Resetting Alarm History
1. From the home page, long tap on
the (Multi Function) button.
2. Scroll with (+) or (-) to Service
(SRV). (Confirm).
3. Scroll with (+) or (-) to
Maintenance (NAint). (Confirm).
4. Scroll with (+) or (-) to Reset (rSt).
(Confirm).
• In case of maintenance, it can be
useful to reset the alarm history.
Turning On/O WiFi
1. From the home page, long tap on
the (Multi Function) button.
2. Scroll with (+) or (-) to Settings
(SEt). (Confirm).
3. Scroll with (+) or (-) to Connection
(Con). (Confirm).
4. Scroll with (+) or (-) to On (on) or
O (oFF).
• If you want to benefit from all
the smart functions of your
water heater, we recommend
you connect your unit to WiFi.
You can just update the software
(highly recommended at the unit
installation) or pair the unit to your
Essency account and use all the
features of the MyEssency App.