18
4.2.5
4.2.54.2.5
4.2.5 Data/Time Screen
The screen to set the date and time for printout and communication output
(1)
Select the item to be changed with
and set the detail with .
“Date Form
Date FormDate Form
Date Form”：YMD
YMD YMD
YMD → Year, Month, Day
“Date Form
Date FormDate Form
Date Form”：DMY
DMY DMY
DMY → Day, Month, Year
“Date Form
Date FormDate Form
Date Form”：MDY
MDY MDY
MDY → Month, Day, Year
Date: change of date
Date: change of dateDate: change of date
Date: change of date
Select “Date” with .
Move the cursor to the item to be changed
with .
While the Memory/ ADD switch is held, the
Screen (2) is displayed. Make changes with
.
Time
TimeTime
Time：
：：
： change of time
change of time change of time
change of time
Select “Time” with .
Move the cursor to the item to be changed with
.
While Memory/ Add switch is pressed, the
Screen (2) is displayed. Make changes with
.
4.2.6
4.2.64.2.6
4.2.6 Default Setting Screen
The screen to change the setting of the device back to the default
The list of the items changed from the default is also displayed.
Press if you wish to change the setting back
to the default.
Press if you do not wish to change the setting
back to the default. It goes back to the measurement
screen after pressing either switch.
(2) While the Memory/ ADD switch is pressed
To Next Page
Loading...
Need help?
General
