Essilor Instruments ALM 500 - Replacement of Marking Pen

21
5.3.2
5.3.25.3.2
5.3.2 Replacement of Marking Pen
Replacement of Marking PenReplacement of Marking Pen
Replacement of Marking Pen
The marking pen is the consumable item.
Replace it if the imprint becomes thin or the pen tip is worn.
(1) Remove the marking pen by pressing and rotating it 90 degrees as shown below.
(2) Insert the new pen back to the initial position as shown below.
Insert the marking pen, and fix it by rotating
90 degrees.
・Ensure to use the marking pen specified for “DL-900”.
・Do not touch the pen tip at the time of replacement.
Marking pen