Essilor Instruments ALM 500 - Replacement of Fuse

24
5.5
5.55.5
5.5 Replacement of Fuse
Replacement of FuseReplacement of Fuse
Replacement of Fuse
Unplug the power cord before removing the fuse holder at the time of replacing the fuse.
Electric shock may occur if removing the fuse holder without unplugging the power cord.
When the fuse is brown out, replace it after removing the fuse holder of the power inlet.
The fuse holder is removed from the main unit by pulling it out.
Always use the specified fuse (T2A 250V)
Warning
WarningWarning
Warning
Fuse
Power inlet
(with fuse holder)
!