Estrima BIRO - Vehicle Start with Birò Card

Use and maintenance manual 03.01 – 22/06/201626
VEHICLE START WITH CARD
1. Place the Birò Card about 10
centimetres from the reader
for identication. The red light
will turn on to indicate that
the vehicle is no longer in
standby mode.
2. Hold the Birò Card against
the windscreen, inside the
white markings, for at least 3
seconds (3 ashes of the red
light). When the left direction
indicator blinks, it means that
the driver side door’s lock
successfully opened.
3. Enter the cabin and insert the
Birò Card into the specic
slot of the reader within 1
minute in order to switch Birò
on. Keep the Birò Card inside
the reader for the entire drive.
4. In order to end the use of
Birò, pull the Birò Card out
from the reader. The engines
will deactivate within 5
seconds and the driver side
door will lock shortly after (it’s
always possible to open the
door from inside, even if it is
locked).
10-15 cm
1
2
3
4