Estrima BIRO - Estrima Periodic Maintenance

Use and maintenance manual 03.01 – 22/06/2016 57
ESTRIMA PERIODIC MAINTENANCE
In order to keep a perfect functionality of your Birò, you must follow all the rules contained
in this manual and the periodic maintenance schedule. This schedule includes uid topping
procedures, constant checks and essential operations to have a correct functionality of the
vehicle. A missing or not in time periodic check as described in the following “Periodic
maintenance schedule” brings to the inevitable decay of the warranty. The respect of
Estrima periodic maintenance and the relative procedures is obligatory during
the vehicle warranty period.
PERIODIC MAINTENANCE SCHEDULE:
A) First ofcial check: 6 (six) months after the date of the vehicle registration;
B) Second ofcial check: 12 (twelve) months after the date of the vehicle registration;
C) Third ofcial check: 18 (eighteen) months after the vehicle registration.
In addition to the ofcial half-yearly checks, the following procedures must be performed
with the periodicity written, in order to avoid the warranty decay:
Periodicity of the following operations (in a standard condition)
(take a look to chapter 3 “Maintenance”):
UNIT OPERATION CHECK/SUBSTITUTION
1. Body-work
Visual check of the body
elements, underbody side,
opening parts, gaskets...
CHECK
every 5000 km
or 12 months
2. Brakes
Visual check of the brake pads
wear
CHECK
every 5000 km
or 6 months
Visual check of the circuit
holding
Visual check of the brake liquid
3. Brake liquid
Substitution with DOT 4 Oil
from an empty tank
SUBSTITUTION
every 15000 km
or 18 months
4. Suspension
Visual check of the elements
CHECK
every 5000 km
or 12 months
5. Wheels and tires
Wear and general conditions
check of the tires
CHECK
every 5000 km
or 6 months
Visual check of the rims
Visual check of front and back
dampers